Adhesive 88-NP-1

1. Appearance: Viscous mass from light-yellow to light-brown (at ≥15°C) 2. Homogeneity: Homogeneous 3. Conditional viscosity (ball viscometer), s: 2–25 4. Bond strength of vulcanized rubber P-56 (TU 38 0051166-98) with D-16 aluminum alloy (GOST 21631) or St.3 steel (GOST 380, GOST 21488) at (23±5)°C after 24 h curing: Peel strength, N/mm (kgf/cm), min: 1.96 (2.0) 5. Density, kg/m³, min: 900

Adhesive 88-NP (for general industrial purposes), Adhesive 88-NP-1 (for aviation industry) is intended for cold bonding of rubbers (including sponge) based on NK, SKN, SKB, SKS, SKMS – chloroprene rubbers to metals (including painted), glass, and other materials, as well as rubber-to-rubber bonding, operating in air under any climate conditions at temperatures from -50 to +70°C.
Contact with the adhesive does not cause corrosion of aluminum alloy D-16 anodized clad and unclad, non-anodized clad aluminum alloys, magnesium alloy MA-3 oxidized, cadmium-plated and galvanized steel with chromate passivation, or copper, and does not increase corrosion of unclad, non-anodized aluminum alloys and unprotected carbon steel.

Main application areas:
Aviation:

• Bonding sound insulation materials, ceiling PVC films to painted and unpainted metal.
• Bonding rubber seals operating in extreme climate conditions.

Automotive:

• Interior assembly: upholstery, door seals, seat assembly (foam + fabric).

Industry and construction:

• Bonding rubber with concrete, wood, glass, ceramics.
• Laying linoleum, carpets, decorative panels.