Adhesive 78 BCSP-M

Adhesive 78 BCSP-M is a modification of adhesive 78 BCSP, belonging to cold-curing adhesives based on chloroprene rubber, intended for bonding rubber (including sponge rubber) with metal, wood, glass and other surfaces. They provide strong joints resistant to fresh and sea water and operate over a wide temperature range.

Category: Rubber Adhesives

Purpose: Aerospace industry

Purpose: Shipbuilding

Purpose: Automotive industry

Purpose: Construction and industry

Technical specifications

Main purpose and application

Technical specifications

1. Appearance: Viscous mass from light-yellow to light-brown (at ≥15°C) 2. Homogeneity: Homogeneous 3. Conditional viscosity (VZ-246 viscometer, nozzle Ø6.0 mm), s: 10–40 After 24 h curing: – Peel strength, N/mm (kgf/cm), min: 2.26 (2.3) – Tensile strength, MPa (kgf/cm²), min: 1.18 (12.0) After 48 h curing: – Peel strength, N/mm (kgf/cm), min: 2.45 (2.5) – Tensile strength, MPa (kgf/cm²), min: 1.28 (13.0)

Main purpose and application

Adhesive 78 BCSP-M is intended for cold bonding of sponge rubber seals made of 51-1610 rubber based on SKEPTs with painted metal.
Adhesive joints using 78 BCSP-M adhesive are resistant to fresh and seawater. Products bonded with this adhesive can operate in all climate zones in the temperature range from -60° to +100°C.

Main application areas:

Aviation and shipbuilding: Sealing rubber seals, bonding gaskets to metal surfaces.
Automotive industry: Installation of sound insulation, upholstery repair.
Construction: Bonding rubber with concrete, wood, glass.